|
Title: how to make a poor mixture in vr5 2.3L 066906032AG? Post by: yutu on January 09, 2023, 04:25:27 PM I need to deplete the working mixture in the vr5 170h.p. engine to increase efficiency. Experimentally, when working on propane gas, I revealed the maximum efficiency with a mixture of 1.14. How can I change the limit of the fuel mixture from 1 to 1.14 in the firmware?
I only need help to remove the restriction of 1 to 14.7 fuel mixture in the firmware . and I will correct the fuel mixture maps myself . the best idea for me would be if someone had damos for this firmware on the vr5 170 horsepower Title: Re: how to make a poor mixture in vr5 2.3L 066906032AG? Post by: Kacpern on January 19, 2023, 12:13:09 PM This driver does not support a mixture higher than 1
Title: Re: how to make a poor mixture in vr5 2.3L 066906032AG? Post by: yutu on January 19, 2023, 12:28:25 PM This driver does not support a mixture higher than 1 I know. therefore , I want to find out where to change the code in order to prescribe a mixture above 1 . many people here are able to disassemble the code and change the limit from 1 to 1.14Title: Re: how to make a poor mixture in vr5 2.3L 066906032AG? Post by: yutu on January 19, 2023, 12:30:41 PM This driver does not support a mixture higher than 1 Or the second option is to change the linearization of the wideband oxygen sensor so that it gives false data to the ecu. |