|
Title: 2009 VW T5 - VAG Commander 1.4 Post by: thibay on January 26, 2023, 07:11:33 AM Hello,
I'd like to extract the PIN-SKC code, switch IMMO ON and pair a new key on my 2009 VW T5 7H AXB engine. I do have a VAG K+CAN Commander 1.4(China) and matching cable on a Windows 10. Using K-Line, I can open channel on 07 Kombi so it's reading VIN and instrument cluster type (VDO V04). However when I'm going in Instrument/Immobilizer I can't read the EEPROM whatever the function. Same thing trying to read the ECU. Am I using the wrong software, cable or both? Instrument Cluster: 7H0 920 851R ECU: 03890601 6AJ Long story short my Transporter was stolen and retrieved -lucky me- a few years back. Now it's time to sell it and I don't want the "SAFE" word displayed all over the place. Thanks already, Thib Title: Re: 2009 VW T5 - VAG Commander 1.4 Post by: Dande on January 26, 2023, 10:08:09 AM Hello,
its imposible do this via vag programmer on cars 2009+. You need abrites, smok or another tool. Title: Re: 2009 VW T5 - VAG Commander 1.4 Post by: thibay on January 28, 2023, 07:52:39 AM Hello, its imposible do this via vag programmer on cars 2009+. You need abrites, smok or another tool. Ok thanks! Abrites and smok appear to be in a totally different price league. Is there anything cheaper? Title: Re: 2009 VW T5 - VAG Commander 1.4 Post by: thibay on January 28, 2023, 08:10:28 AM Or is there a different software to just read/write the eeprom?
Title: Re: 2009 VW T5 - VAG Commander 1.4 Post by: Dande on January 28, 2023, 10:45:23 AM Carprog. Its not as good as other tools, but it can do some job. Some dashboards only clone with this tool.
https://codecard.eu/index.php?act=viewCat&catId=206 You can try read and write eeprom via CH341 programmer on dash, but IMMO area is crypted. You can switch immo on or off with VAG dash editor. For ecu you need BDM if you want read and write immo area. https://drive.google.com/drive/folders/1x6hXjFOiuVm0EM9ZnOpj9T75i2A_9Cxr |