NefMoto

ECU Files => ECU Definition File Requests => Topic started by: yutu on February 02, 2023, 11:33:23 AM



Title: 066906032AK 0004 golf 4 vr5 2.3
Post by: yutu on February 02, 2023, 11:33:23 AM
Hi everyone,

I am looking for a2l of 066906032AK. I need ignition timing maps and lambda maps. maybe someone made a chip with a vr5 motor and knows at what addresses these cards are?  here is my original


Title: Re: 066906032AK 0004 golf 4 vr5 2.3
Post by: Neight on February 02, 2023, 12:38:05 PM
Timing start at

011647
01246C

Lambda start

010BAF

Not my cup of tea though. Hope that helps as I am usually of no help. lol


Title: Re: 066906032AK 0004 golf 4 vr5 2.3
Post by: _nameless on February 02, 2023, 07:12:05 PM
Hi everyone,

I am looking for a2l of 066906032AK. I need ignition timing maps and lambda maps. maybe someone made a chip with a vr5 motor and knows at what addresses these cards are?  here is my original

Here I made this file and posted it on another forum, youre more than welcome to use or do whatever with
"I had some time to look into it. After spending the better part of an hour switching between 12v vr6 damos and 30v v6 damos i found enough maps in your file to remove throttle delay, fix lambda request fueling axis values, and make a "stage bro" tune (as I call them). Fueling is 13.0:1 afr at full throttle and max advance of 26-27* UOF and FIL rlvmxn rlvsmxn etc. Crackles and pops on decel and a new custom launch control patch.
Long story short: Crisp, quick throttle response, should feel faster and make all the right noises. Oh yeah and hard cut rev limiter at 6500rpm

One more thing. 2 step has temp check. cars engine coolant needs to be at 75*c or above for 2 step, no lift shift and hard cut rev limit to work. Launch is set at 3500rpm with a locked -2* for launch. No lift shift can be used as a rolling 2 step by keeping the clutch in while full throttle and moving."


Title: Re: 066906032AK 0004 golf 4 vr5 2.3
Post by: yutu on February 03, 2023, 03:48:48 PM
Here I made this file and posted it on another forum, youre more than welcome to use or do whatever with
"I had some time to look into it. After spending the better part of an hour switching between 12v vr6 damos and 30v v6 damos i found enough maps in your file to remove throttle delay, fix lambda request fueling axis values, and make a "stage bro" tune (as I call them). Fueling is 13.0:1 afr at full throttle and max advance of 26-27* UOF and FIL rlvmxn rlvsmxn etc. Crackles and pops on decel and a new custom launch control patch.
Long story short: Crisp, quick throttle response, should feel faster and make all the right noises. Oh yeah and hard cut rev limiter at 6500rpm

One more thing. 2 step has temp check. cars engine coolant needs to be at 75*c or above for 2 step, no lift shift and hard cut rev limit to work. Launch is set at 3500rpm with a locked -2* for launch. No lift shift can be used as a rolling 2 step by keeping the clutch in while full throttle and moving."
But how to make a fuel mixture 1k 16.7 in this firmware? in the range of 1000-2300 rpm and light load? Can you share the damos for this firmware? I want to set up economical operation on gas (propane) fuel in it


Title: Re: 066906032AK 0004 golf 4 vr5 2.3
Post by: fknbrkn on February 10, 2023, 02:31:06 AM
Here I made this file and posted it on another forum, youre more than welcome to use or do whatever with
"I had some time to look into it. After spending the better part of an hour switching between 12v vr6 damos and 30v v6 damos i found enough maps in your file to remove throttle delay, fix lambda request fueling axis values, and make a "stage bro" tune (as I call them). Fueling is 13.0:1 afr at full throttle and max advance of 26-27* UOF and FIL rlvmxn rlvsmxn etc. Crackles and pops on decel and a new custom launch control patch.
Long story short: Crisp, quick throttle response, should feel faster and make all the right noises. Oh yeah and hard cut rev limiter at 6500rpm

One more thing. 2 step has temp check. cars engine coolant needs to be at 75*c or above for 2 step, no lift shift and hard cut rev limit to work. Launch is set at 3500rpm with a locked -2* for launch. No lift shift can be used as a rolling 2 step by keeping the clutch in while full throttle and moving."

//nvm


Title: Re: 066906032AK 0004 golf 4 vr5 2.3
Post by: yutu on February 10, 2023, 08:33:47 AM
//nvm

 
did he make a normal tuning firmware? Can I run it?


Title: Re: 066906032AK 0004 golf 4 vr5 2.3
Post by: fknbrkn on February 10, 2023, 10:26:32 AM
Yep ive got a joke about MRTY BSTRD modules here but take a quick look and thats pretty fine file


Title: Re: 066906032AK 0004 golf 4 vr5 2.3
Post by: _nameless on February 10, 2023, 11:22:13 AM
//nvm

What's the problem?