|
Title: Dq250 410nm max engine torque reading Post by: andyc1234 on April 09, 2023, 04:27:18 AM Hi iam trying to do my own dq250 file using the common mapack. I have raised all the the torque limits I can find to 500nm. But on vcds when I view the transmitted engine torque it corresponds with my ecu torque table up to 410 and it then capped at that on the tcu. Could anyone help with where I should be looking for this so the tcu can see 500nm. Iam running an aftermarket ecu setup not the oem ecu
|