|
Title: 1.8T dsg swap Post by: RoggeJ on April 23, 2023, 11:50:24 AM Hi all!
I’m swapping an a3 8l 1.8t auq to dsg, all is good but i have no reverse signal, i found on the internet that i can put the signal to pin 12 in the connector trough the software. Can someone confirm that? If yes can anyone help me with the addres? I guess 05372 ‘selection switch for gear selection in R’ but i don’t know what to change it to or if its even correct. Also, what program do you use for the dsg tuning? I have the winols free, but can’t export and won’t use it much so don’t want to spend all the $ on a one time thing. I’m happy to pay if someone wants to do it for me tho Thanks in advance! Title: Re: 1.8T dsg swap Post by: MirXas on April 24, 2023, 07:13:13 AM You need an old mechatronic unit with one letter at the end, for e.g., 02E927770 E, or a bit newer 02E927770 AD. Only these have analog outputs for vehicle speed, reverse etc.
Otherwise, you can make yourself reverse signal using a 12v timer module connected to the PRNDS indicator led's. Title: Re: 1.8T dsg swap Post by: RoggeJ on April 24, 2023, 02:24:06 PM Okay thanks! I’ll look into the PRNDS option first
Title: Re: 1.8T dsg swap Post by: dal on April 25, 2023, 03:23:56 AM https://www.haldexcontroller.com/en/shop/can-convertors/can-convertor-dsg-detail
|