Title: Old project, still stuck. ME7.1.1 HW3 95160 Post by: voltprinter on July 11, 2023, 07:43:46 AM I've had this ME7.1.1 ecu kicking around, I was messing with a while back trying to dump. Nothing I would do worked. I finally just used a ktag to dump the thing since its supported (claims at least?). I'm still not getting any usable dumps. I actually have 2 ecus and both behave the same, so I don't think it's due to a damaged board.
This is what I am getting with eepromtool: C:\Users\****\Desktop\nefmoto>eepromtool_04.exe --in ME7.1.1_HW3-ebayecu.bin --force Read in 2048bytes EEPROM Status: - Type: ECU_eeprom - Version: Immo2 - VIN: 3VWEF71K27M158468 (VW Mexico 2007 - Golf and Jetta 5, 6, Mexico) - SKC: 03362 - Immobiliser: On - Checksum: Invalid Checksum - Size: 2048bytes - 512bytes expected, check this is a eeprom bin - Cluster Code: BF 35 DE 36 61 49 28 - P0601 DTC: not set - Immo ID: VWZ7Z0G9049140 - Softcoding ID: 0003 - Tuner Tag: Not Set - Flash Programming (successful): 4 - Flash Programming (attempts): 180 Here are the 2 ecus and a screenshot when dumping. Neither fill in the VIN/Engine info https://anonfiles.com/F1b0Aa14z9/ME7113_png https://anonfiles.com/G6bbAc1ez8/me7_1_1_ebayecu_7z https://anonfiles.com/Hfb3Ab16z6/me7_1_1_ebayold_7z If I try to use HWI (read somewhere to try that) Ksuite will detect this as a HWIII ecu and will not let me continue, so it is identifying the ecu correctly. Title: Re: Old project, still stuck. ME7.1.1 HW3 95160 Post by: voltprinter on July 13, 2023, 10:59:14 AM Welp... you know what they say about assuming....
https://i.imgur.com/JhNdE5x.png guess it did work. not sure how to checksum this now though. |