|
Title: nefmoto not recognizing any cable Post by: eurowabbit on July 13, 2023, 08:11:07 PM ive tried a blue vag kkl, a red obdlink sx and a vagcom hex-net. nefmoto wont recognize any of them and yes the drivers are correct. please help. i need this car back on the road literally last week.
Title: Re: nefmoto not recognizing any cable Post by: eurowabbit on July 13, 2023, 08:24:22 PM the red obdlink sx is the only one that pops up on nefmoto now. when i plugged it back in the second time it gave me the option to install drivers. but it wont communicate with the ecu. when i click connect it pops up with 'Failed to read test echo from FTDI device' in the status window.
Title: Re: nefmoto not recognizing any cable Post by: eurowabbit on July 14, 2023, 11:48:01 AM ive redone setup twice now and still nefmoto wont recognize my cable even installed an earlier version of nef moto. still not recognizing my cable.
Title: Re: nefmoto not recognizing any cable Post by: justinvw2646 on July 14, 2023, 08:09:35 PM https://www.ross-tech.com/vag-com/usb/virtual-com-port.php
When using the vcds cable you also need to launch vagcom and put it in dumb mode Title: Re: nefmoto not recognizing any cable Post by: eurowabbit on July 17, 2023, 11:16:25 AM https://www.ross-tech.com/vag-com/usb/virtual-com-port.php When using the vcds cable you also need to launch vagcom and put it in dumb mode i have a hex-net vag com cable so im not able to do that with it. the blue kkl cable i have used to work. i was able to a year or two ago mess with some settings on the cluster. i just cant get anything to recognize the kkl cable at all. Title: Re: nefmoto not recognizing any cable Post by: eurowabbit on September 12, 2023, 09:56:42 PM I fixed it. Used vag commander 1.19 and changed com port in device manager and vag commander to com 2 and it worked.
Sent from my SM-S908U using Tapatalk |