|
Title: ME7.5 Problem with hardcut Post by: xCyberLV on July 24, 2023, 06:50:41 AM Hello, I have a problem with HardCut not working, I have set FTOMN to 0, changed KFSZT, KFTSRL, NMAX, NMAXDVG, DNMAXH, NMAXDV.
But hardcut is not working, if I set KFSZT and KFSTSRL to 6600 RPM (also tried lower and bigger values), and NMAX to 7000, car goes over 6600 RPM to 7000 and does not hardcut. I tried DNMAXH to set 50, 100 and 200, the results are the same. I don't know what I am missing more there as I have tried everything. It is 1.8t - ECU nr. 4B0906018AA I have added my changed file and mappack for that. Title: Re: ME7.5 Problem with hardcut Post by: Leonhard on July 27, 2023, 11:47:13 PM hardcut is fuel-injection related (Einspritzausblendung = injection turned off -> B_nmaxh)
hardcut -> nmot = NMAXOG + DNMAXH NMAXOG = increased NMAX DNMAXH = delta nmot for injection turned off (hysteresis) usually you have: NMAX = 6600 NMAXOG = 6600 DNMAXH = 200 Title: Re: ME7.5 Problem with hardcut Post by: Pendrak on July 28, 2023, 02:34:30 AM Do you have any fault's in ECU?
|