|
Title: MK4 AUQ N75 adjust PID Post by: 2stroket on August 12, 2023, 11:36:27 AM Hi!!
I'm a still reader since 3 years. Got into the world of Winols/Tunerpro/EDC Suite - bevor in the older 1.9TDI Fraction (ACV/ASZ/ARL/AJM). I think i'm on the way to understand basic things from ME7. Tried many things, but yes... mostly compare other tunes - thats not the right way. In the past months trying more and more to understand changes in the ME world. Please look at my Log.. Got this boost spike which is okay to me but how can i smooth this out to not have this wired boost up and down You can see on the log that the N75 Falls down from 77% to 74% and then this boost drop happens. Where i have to adjust to prevent this? Title: Re: MK4 AUQ N75 adjust PID Post by: TeknoFi on August 12, 2023, 12:44:13 PM I dont see much of problem in that log ..
the boost pressure follows the request = good Only what i'd do is try to smooth a 3,2k-3,6k part in request. These maps have an effect on the final boost request what you see in logs: KFMIRL LDRXN(ZK) KFLDHBN that could be evened out just with the help of those, with a small changes...I'd just go straight to LDRXN and KFLDHBN first and look what numbers they contain... Up from 3600rpm everything looks decent for K03S? turbo, it should taper down after 4k, thats not a fault. You can put more request (raise KFLDHBN+LDRXN if needed) and turn your turbo into a real heat pump but that's hardly desired? I can't offer anything else since I'm a beginner myself, it's worth reading a few times https://s4wiki.com/wiki/Tuning#Specifying_requested_boost Title: Re: MK4 AUQ N75 adjust PID Post by: nyet on August 12, 2023, 04:35:33 PM ME7logger or you aren't going to get anywhere.
|