|
Title: vr6 24v aue Post by: Lohs123 on August 28, 2023, 03:58:19 AM Hi. someone know how to disable rear 02 sensors to make working bouth front 02?
i have build vr6 turbo 24v turbo gt3071r gen 2 intake 63mm exhaust 76mm custom downpype with 2 original lamda sensors bank1 sensor 1 and bank 2 sensor 1 and one lambda sensor for afr gauge maf housing 90mm with maf from audi rs4 v8 injectors at this moment stock but already have deca fi114961 630cc sach performance clutch ceramic kit engine spacer for 8:5 compression at moment i tune maf scaling for 90mm car idlle perfect afr 14.5 but have problem when i rev the car past 3000rpm then rpm comes down too fast and car stall at that moment afr is aboute 10-11 i think its because 02 sensors wont work cause rear sensors have faulth short circuit if someone can help with tune for stock ME 7.1 ecu i will be able to pay for helping! :) thanks to all and i am not asking information for free soo dont judge me! :D Title: Re: vr6 24v aue Post by: LoursRose on September 03, 2023, 05:59:30 AM Hello, can you post your file? you want rear O2 off?
Title: Re: vr6 24v aue Post by: _nameless on September 03, 2023, 04:13:32 PM I've done several vrt setups if you still need assistance :) with a tune feel free to shoot me a pm
Title: Re: vr6 24v aue Post by: Lohs123 on September 16, 2023, 02:35:26 PM Hello, can you post your file? you want rear O2 off? there is the soft need rear o2 off yes please! :) |