|
Title: Lean Stock KFLBTS Post by: greektuner on September 05, 2023, 06:13:29 AM for some unknown reason my kflbts maps are lean at low load, are these correct?
Title: Re: Lean Stock KFLBTS Post by: BlackT on September 05, 2023, 11:32:55 AM Yes
Title: Re: Lean Stock KFLBTS Post by: greektuner on September 05, 2023, 04:16:51 PM but 1,25 lambda?
Title: Re: Lean Stock KFLBTS Post by: BlackT on September 05, 2023, 05:17:37 PM Is that a problem? Did you read S4wiki yust once?
Title: Re: Lean Stock KFLBTS Post by: greektuner on September 05, 2023, 05:43:15 PM Lot of times, and for what i see Motronic never should goes lean than lambda 1, that's my question.
Title: Re: Lean Stock KFLBTS Post by: prj on September 06, 2023, 01:09:35 AM Lot of times, and for what i see Motronic never should goes lean than lambda 1, that's my question. So if it never goes leaner than lambda 1, what does it matter if it's 1.25 or 5.0 or 10.0 in that map? I suggest looking at LAMBTS module whole calculation, especially DLBTS and DZWETA and understanding why someone might choose to put something higher than lambda 1 into the KFLBTS map. Also, looking at LAMKO might help. |