|
Title: Problem with LC, ignition goes to -30 deg Post by: BlackT on September 09, 2023, 02:03:47 PM I made a function for LC with ign retard. My zwgru is fixed to -12, but real ignition goes under -30, how is that possible, that is even lower than KFZWMN?
M-BOX with STG2 Title: Re: Problem with LC, ignition goes to -30 deg Post by: fknbrkn on September 12, 2023, 12:14:11 AM Log zwmin or zwmn iirc
There is a lot of possible issues depending of how your routine works Where it hooked in code etc Title: Re: Problem with LC, ignition goes to -30 deg Post by: BlackT on September 19, 2023, 03:05:07 AM Maybe is better then to manipulate with zwist?
Title: Re: Problem with LC, ignition goes to -30 deg Post by: prj on September 19, 2023, 12:47:50 PM Actually the right way to do it is to set a higher torque reserve and the ECU will do the rest...
But zwout is possible too. |