|
Title: how to lowe Trotle body plade position on idle Post by: lowrideris on July 12, 2012, 06:18:13 AM swaped trotle blade from 57mm to 63.. now idling at 1850.. and jumping rpm:(
what maps need to adjust to lower TB blade on idle ? ECU ME1.5.5 Title: Re: how to lowe Trotle body plade position on idle Post by: kenmac on July 12, 2012, 10:38:58 AM Don't you just need to perform a throttle adaptation?
http://www.ross-tech.com/vag-com/cars/throttlebody.html As far as I know, plate angle doesn't map to a certain rpm. Title: Re: how to lowe Trotle body plade position on idle Post by: Robson on July 12, 2012, 03:33:48 PM I would be interested in this as well although i think my occasional problem is down to a faulty temp sensor .
Im sure i have read on here somewhere about tuning for different size throttle body size but cannot find it Title: Re: how to lowe Trotle body plade position on idle Post by: Robson on July 13, 2012, 12:05:43 PM Just out of interest ME1.5.5 ......... are you tuning a z20let ??
|