|
Title: Programming Motronic ME 5.2.2 on Porsche 996 -99 Post by: Carrera911 on July 12, 2012, 10:42:42 AM hi
Im completly new to this and wonder if somone can help me with what I need to write an flash my Me 5.2.2 on my Porsche 996 -99. Im installing a Supercharger as a DIY project so need to adjust fuel and timing for that. (thought this was better than using eftermarket ECU or Piggyback) As I have understand I can use Galletto 1260 to flash my ECU (or are there better option) but how can I change the programfile? Is there some newbie tutorial somwhere? BR Erik Title: Re: Programming Motronic ME 5.2.2 on Porsche 996 -99 Post by: vcom on July 17, 2012, 07:08:32 AM hi Im completly new to this and wonder if somone can help me with what I need to write an flash my Me 5.2.2 on my Porsche 996 -99. Im installing a Supercharger as a DIY project so need to adjust fuel and timing for that. (thought this was better than using eftermarket ECU or Piggyback) As I have understand I can use Galletto 1260 to flash my ECU (or are there better option) but how can I change the programfile? Is there some newbie tutorial somwhere? BR Erik I would be also interested in that. I am not shure, if galetto 1260 is the right way to flash your ecu. Durametric supports all porsches. But unfortunately its only for reading and not for Ecu Mapping. vcom Title: Re: Programming Motronic ME 5.2.2 on Porsche 996 -99 Post by: Carrera911 on September 17, 2012, 03:27:14 AM Galetto is supporting Porsche 996 ME 5.2 se link : http://www.obd2be.com/download/Galletto%201260%20Compatible%20Vehicles.pdf
have found the program Pro2DMEeditor and onder if anyone have used that -it looks nice! //E |