NefMoto

Technical => Flashing and Chipping => Topic started by: tmc on January 06, 2024, 07:22:26 AM



Title: Please help me, I need MEG17.9.12 TC1762 immo off EEPROM and Maps
Post by: tmc on January 06, 2024, 07:22:26 AM
My ECU unit is damaged, I tried to make a backup using Ktag but I couldn't. I have a spare ECU, but I don't have the firmware. And since I'm going to use someone else's EEPROM I also need to remove the immobilizer.

Does anyone please have the EEPROM and Maps? I'm using Ktag, thank you

Car details :

Make : Hyundai
Model : Accent
Year : 2012
Gear type: Automatic
Engine type : 1.4L DOHC


Title: Re: Please help me, I need MEG17.9.12 TC1762 immo off firmware
Post by: _nameless on January 11, 2024, 08:42:09 PM
My ECU unit is damaged, I tried to make a backup using Ktag but I couldn't. I have a spare ECU, but I don't have the firmware. And since I'm going to use someone else's firmware I also need to remove the immobilizer.

Does anyone please have the firmware? thank you

Car details :

Make : Hyundai
Model : Accent
Year : 2012
Gear type: Automatic
Engine type : 1.4L DOHC
That would be a SIM2K-241, and you'll be hard pressed to find someone who has that original floating around as virtually none would modify a 1.4l Hyundai. Did you not buy the correct replacement ecu? If you bought the same ecu, the cal software thats on the replacement should be fine for the application. Also, you did not post any relevant information and you posted in the wrong section. If needed I can do the immo off however you will need to provide the software


Title: Re: Please help me, I need MEG17.9.12 TC1762 immo off firmware
Post by: tmc on January 29, 2024, 07:08:09 AM
That would be a SIM2K-241, and you'll be hard pressed to find someone who has that original floating around as virtually none would modify a 1.4l Hyundai. Did you not buy the correct replacement ecu? If you bought the same ecu, the cal software thats on the replacement should be fine for the application. Also, you did not post any relevant information and you posted in the wrong section. If needed I can do the immo off however you will need to provide the software

Where's the correct section?

This is my ecu from inside :

https://imgur.com/a/X3wilgY (https://imgur.com/a/X3wilgY)

This is the main MCU in the ECU, it's TC1762

https://imgur.com/a/8cPQVx3 (https://imgur.com/a/8cPQVx3)

This is the old ECU information :

https://imgur.com/a/YDvcOEG (https://imgur.com/a/YDvcOEG)

This is the spare ECU information :

https://imgur.com/a/PHTOQ0a (https://imgur.com/a/PHTOQ0a)