NefMoto

Hello.
tl;dr: read dtcs in linux with ch340?

Has anyone been able to Read and Clear DTCs from ME7.5 on Linux? Is there a tool that I might have missed while looking into this?
I am currently planning on setting up a raspberry pi based ME7Logger to ditch the laptop from my passenger seat and I was wondering if I could maybe use the setup I will have to also just quickly look through the DTCs and clear them ?
a terminal based simple dump of codes would be perfect, as I won't be using a screen for this setup. I know it's possible as me7logger exists in linux natively, just wondering if anyones actually done it to not reinvent the wheel

A VM or WINE layer for VCDS is not an option as i'd then could just plug in my laptop. Nefmoto can read codes but doesn't clear them successfully and it's also windows only.
I would love to use CH340 based cable, but if FTDI or HEX-V2 is required I will come up with something.

edit: pyVCDS is something I just found after altering my search query but it's been abandoned three years go and has been only tested with STM32F072.
I might be able to test it later this week with CH/FTDI, so if nothing else comes up - I will update if that still works

bump