|
Title: ME 7.5 P0136 delete Post by: Zygi on February 02, 2024, 02:13:02 PM Hi guys,
I gave up with P0136 OBD fault in Audi A3. Error always appear when i tried to turn it off. 1. I set 0 on level fault. Find that there are 2 faults on 66 and 99 position. Both 0 result error again. 2. tried this CDKAT, CDLASH, CDLATV, CDLSA, CDLSH, CWKONABG, CWKONLS. I couldn't damos for my ecu, so i find different me7.5 with damos and looking more or less same values i found what i need. Well i hope, cause when i zero all values error appear once again. So, how to delete this fault? ECU is 06A906032BJ but previous owner said that he upload AUQ (180ps) map to this car. I tried s4wiki.com, looked this forum but i couldn't find anything helpful and i passed. Title: Re: ME 7.5 P0136 delete Post by: _nameless on February 03, 2024, 07:50:27 AM If the sensor is unplugged you need to do the end staging table too for the I/O's. Project configuration is just configuration, you still need to set the bits in Eskonf to 11 for the open circuit codes to go away
|