|
Title: Are all 5HP19 have same gear ratio? Diesel/petrol? Post by: BlackT on February 02, 2024, 03:37:03 PM Are gearbox same, mehatronic and valves?
Is it possible to put 5hp19 gearbox amd diff from 2.5 TDI to 2.7TT and leave ECU and TCU from 2.7TT As I know they all have same speed ratio only final gear are not same? Or I am wrong Title: Re: Are all 5HP19 have same gear ratio? Diesel/petrol? Post by: nupustas on February 03, 2024, 10:34:01 AM Are gearbox same, mehatronic and valves? Maybe it helps. When i made gearbox with own ratios(but for different car), i searched info in this page: https://audi.7zap.com/en/rdw/audi+a6+avant/a6/2002-264/3/ You can check components numbers according to gearboxes Is it possible to put 5hp19 gearbox amd diff from 2.5 TDI to 2.7TT and leave ECU and TCU from 2.7TT As I know they all have same speed ratio only final gear are not same? Or I am wrong Title: Re: Are all 5HP19 have same gear ratio? Diesel/petrol? Post by: dus on February 04, 2024, 11:59:41 PM Are gearbox same, mehatronic and valves? Is it possible to put 5hp19 gearbox amd diff from 2.5 TDI to 2.7TT and leave ECU and TCU from 2.7TT As I know they all have same speed ratio only final gear are not same? Or I am wrong The final gear ratio is different, the transfer case to the front axle and the transfer case to the rear axle are also different. and since the center distances of the gears in the transfer case to the front axle are different, the box body itself is different. The rotation sensor is also installed on the output shaft to the front axle, so the gear ratio in the transfer case is important. you need to install the final gear pair in your box. It is possible to adjust the gearing. Allroad 2.7t has its own individual box housing and corresponding transfer case housing and front axle drive gear |