|
Title: D-box similar config to M-box? Post by: maxb5nz on March 13, 2024, 07:36:42 PM Hi fellas,
Attempting to start doing some logs, never done it before. I Have a D-box ecu, mate of mine said it may not have parameters for rear o2 sensors. Could someone please shed some light on if my ecu will log wide band. Thanks! Title: Re: D-box similar config to M-box? Post by: prj on March 14, 2024, 05:06:19 AM There is no 2.7T ecu with wideband.
Title: Re: D-box similar config to M-box? Post by: IamwhoIam on March 14, 2024, 06:33:11 AM D box ECU doesn't have rear O2 sensors
Title: Re: D-box similar config to M-box? Post by: prj on March 14, 2024, 07:19:02 AM If you mean that you want to connect an aftermarket wideband to rear o2, then you can do that.
Check what the pinout is for lambda signal, it will be unpopulated in the connector, you can just put the wire there directly. The ECU inside has all of this connected and you can log the variables. Title: Re: D-box similar config to M-box? Post by: maxb5nz on March 16, 2024, 06:14:34 PM If you mean that you want to connect an aftermarket wideband to rear o2, then you can do that. Check what the pinout is for lambda signal, it will be unpopulated in the connector, you can just put the wire there directly. The ECU inside has all of this connected and you can log the variables. Hey mate, thanks for the response. I have got it all up and running, I'm running a 3bar map sensor, is there an expression I need to add? Title: Re: D-box similar config to M-box? Post by: prj on March 17, 2024, 02:58:05 AM Not sure what you mean by "expression".
Also the ECU can't read above 2560mbar without 5120 patch, so your 3 bar sensor is most likely useless. Title: Re: D-box similar config to M-box? Post by: maxb5nz on March 17, 2024, 04:00:57 AM Just connected to the ME7 Flasher and it says 8D0907551M
Title: Re: D-box similar config to M-box? Post by: _nameless on March 17, 2024, 05:46:21 AM seems as it was already swapped. So this should be really easy for you
|