|
Title: fully bricked me7.5 ecu Post by: bazs022 on April 08, 2024, 09:49:06 AM hello
i accidentally fully bricked my me7.5 edited the original program and forget the checksum corrector now the car won't start and I can't read and write the ecu I tried boot mode but it also didn't work my apps ran out of 10 use i have kess v2 (china) and galetto 1260 any ideas to save. this ecu? Title: Re: fully bricked me7.5 ecu Post by: dal on April 08, 2024, 10:55:37 AM galetto 1260 with bootmode. very easy.
Title: Re: fully bricked me7.5 ecu Post by: BlackT on April 08, 2024, 11:07:00 AM Unplug possitive battery for 2 minutes. You can start car after that, flash tune also
Title: Re: fully bricked me7.5 ecu Post by: bazs022 on April 08, 2024, 02:34:04 PM I tried boot mode in my desk, in the car, unplug the battery, boot pin 1 sec 5sec 10sec
And still no response Galetto: boot mode inactive Kess v2: unknown ecu type and wake up error Title: Re: fully bricked me7.5 ecu Post by: BlackT on April 09, 2024, 12:27:21 AM Don't put power to pin 121 when you try boot mode
|