NefMoto

Noob Zone => Noob Questions => Topic started by: Somebody on April 10, 2024, 05:42:17 AM



Title: Audi A4 B5 2.4 V6 165HP Pops and Bangs Finding Maps Location
Post by: Somebody on April 10, 2024, 05:42:17 AM
Hello,

i need a bit help wth finding/checking a few map locations for pops and bangs. Or maybe there is a .xdf or .ols project?

CWSAWE - is it correct at 158AC?
KFZWMN - is it correct at 163B2? Are there 2 of these maps?
KFTVSA
KFTVSAKAT
DNWEK

Does this ecu support switching on/off pops and bangs with AC-Button (DNWEK Map)?
The car has automatic transmission.

Thanks in advance!


Title: Re: Audi A4 B5 2.4 V6 165HP Pops and Bangs Finding Maps Location
Post by: gremlin on April 10, 2024, 07:22:24 PM
Below some hints..
CWSAWE - 158A9
KFZWMN - 137B8
KFZWMNST - 13896
KFTVSA - 196FE
KFTVSAKAT - not exist in this firmware
DNWEK -158AF


Title: Re: Audi A4 B5 2.4 V6 165HP Pops and Bangs Finding Maps Location
Post by: Somebody on April 11, 2024, 03:01:33 AM
Below some hints..
CWSAWE - 158A9
KFZWMN - 137B8
KFZWMNST - 13896
KFTVSA - 196FE
KFTVSAKAT - not exist in this firmware
DNWEK -158AF


Thank you very much!

Do you know if I have to consider anything else if the vehicle has tiptronic?

Is it possible that it won't work without kftvsakat?

And I've read something about dnwekfs, but I don't know if I have to modify that too.

Regards


Title: Re: Audi A4 B5 2.4 V6 165HP Pops and Bangs Finding Maps Location
Post by: Somebody on August 19, 2024, 03:48:01 AM
I've tried a few things, you can hear it when I'm revving off, but unfortunately it's not really strong.

Switching via the AC button doesn't work either. Either I have the wrong addresses, or the ecu does not support the function.

Maybe someone can help?


Title: Re: Audi A4 B5 2.4 V6 165HP Pops and Bangs Finding Maps Location
Post by: fknbrkn on August 19, 2024, 05:22:02 AM
I've tried a few things, you can hear it when I'm revving off, but unfortunately it's not really strong.

Switching via the AC button doesn't work either. Either I have the wrong addresses, or the ecu does not support the function.

Maybe someone can help?

Logs can help you
Also kfzwop/2


Title: Re: Audi A4 B5 2.4 V6 165HP Pops and Bangs Finding Maps Location
Post by: Somebody on August 21, 2024, 05:55:45 PM
Okay, tried to find KFZW/KFZWOP/KFZWOP2 and modified them.

Can you confirm that i found the correct maps? (and did the right modifications)

KFZW 0x164C1
KFZWOP 0x15B85
KFZWOP2 0x15C35

Haven't tested it on the vehicle yet.


Thanks :)


Title: Re: Audi A4 B5 2.4 V6 165HP Pops and Bangs Finding Maps Location
Post by: gremlin on August 22, 2024, 10:46:28 AM
KFZWOP 0x15B85
KFZWOP2 0x15C35
Above maps are OK.

KFZW -> 0x16472
KFZW2-> 0x16532
Both maps 8-bit 12x16


Title: Re: Audi A4 B5 2.4 V6 165HP Pops and Bangs Finding Maps Location
Post by: Somebody on August 22, 2024, 04:18:45 PM
Above maps are OK.

KFZW -> 0x16472
KFZW2-> 0x16532
Both maps 8-bit 12x16

Thanks a lot. Will try it tomorrow


Title: Re: Audi A4 B5 2.4 V6 165HP Pops and Bangs Finding Maps Location
Post by: Somebody on August 28, 2024, 04:44:34 PM
Works very well now :)

Changed KFZWMN, KFZWOP, KFZWOP2, KFTVSA.

And then DNWEK to 6000 and KFTVSA to 0 to make it controllable with AC switch. Works great.

Now I'm reading about hardcut limiter and looking for KFSZT but can't find it yet. Can you help me with the address and is it the only map I need to adjust? And maybe FTOMN?

Thanks :)



Edit: Maybe found KFSZT at 0x167BB ? And FTOMN at 0x1671F ? Is it correct? And NMAX at 0x133FA? :D


Title: Re: Audi A4 B5 2.4 V6 165HP Pops and Bangs Finding Maps Location
Post by: gremlin on August 29, 2024, 06:15:40 AM
Edit: Maybe found KFSZT at 0x167BB ? And FTOMN at 0x1671F ? Is it correct? And NMAX at 0x133FA? :D

OK. All well defined.


Title: Re: Audi A4 B5 2.4 V6 165HP Pops and Bangs Finding Maps Location
Post by: Somebody on August 29, 2024, 06:42:33 AM
OK. All well defined.

Thank you, that makes me happy :D

The map at 0x13896, is it KFZWMS?

Edit: Ahh no, you have already mentioned it (KFZWMNST)