|
Title: Anyone have the OE characterization for lpfp in 2020+ RSQ8 or Urus? Post by: mtb703 on April 12, 2024, 08:43:27 AM Using this pump on another project, hoping to avoid buying a mappack for just one map.
Thanks! Title: Re: Anyone have the OE characterization for lpfp in 2020+ RSQ8 or Urus? Post by: prj on April 14, 2024, 03:02:26 AM Not sure how useful it is going to be.
Title: Re: Anyone have the OE characterization for lpfp in 2020+ RSQ8 or Urus? Post by: mtb703 on April 14, 2024, 06:28:59 AM I'm sure there's some PID control that would get my duty cycle where it needed to be, but was hoping to get it right in calibration.
This is exactly what I wanted. Thanks man! Title: Re: Anyone have the OE characterization for lpfp in 2020+ RSQ8 or Urus? Post by: quattro85 on April 14, 2024, 09:12:21 AM And here the one from B8.5 2.0T EA888.2....
Looking at the numbers - is it means RSQ8 LPFP is not much more (if any) productive than standard 2.0T LPFP? Title: Re: Anyone have the OE characterization for lpfp in 2020+ RSQ8 or Urus? Post by: mtb703 on April 14, 2024, 12:09:16 PM Yeah, I was converting the g/min to lph and its way low for the pump, which is a variant of the Veyron pump.
Sent from my Pixel 4 using Tapatalk |