|
Title: SKC works for Engine but not instruments Post by: audiripper123 on April 14, 2024, 11:54:26 AM I got my SKC code and verified it works for the ECU controller. unfortunately when i try to login using the same SKC for instruments it says the code is incorrect.
Would anyone be able to share information on what i need to do or how to get the SKC to work? My end goal is to adapt the keys to the cluster so i can drive the car. More information: ECU(7.1.1) is from a different car and has Immo turned off, cluster is also from a different car RB4(different from ECU) and key is from original cluster. TYIA :) Title: Re: SKC works for Engine but not instruments Post by: dal on April 14, 2024, 12:12:12 PM You already answered yourself.
Quote "ECU is from a different car" Your ECU has one SKC number... Quote "cluster is also from a different car(different from ECU)" Your cluster has another SKC number... Quote "when i try to login using the same SKC for instruments it says the code is incorrect" There is no point trying to use the ECU SKC in a cluster from another car. This cluster have another SKC, you must read it to use it. Quote "ECU is from a different car and has Immo turned off" You have to address this too. Immo must be on for proper ECU/cluster adaptation. Title: Re: SKC works for Engine but not instruments Post by: audiripper123 on April 14, 2024, 12:15:39 PM You already answered yourself. Your ECU has one SKC number... Your cluster has another SKC number... There is no point trying to use the ECU SKC in a cluster from another car. This cluster have another SKC, you must read it to use it. You have to address this too. Immo must be on for proper ECU/cluster adaptation. Thanks for reply. I figured I did this wrong. How would I grab SKC from cluster? Title: Re: SKC works for Engine but not instruments Post by: dal on April 15, 2024, 03:07:59 AM Thanks for reply. I figured I did this wrong. How would I grab SKC from cluster? Buy an blue KKL cable and use software VAGEepromprogrammer. |