|
Title: DQ250 F40s shiftpoints Post by: razor1199 on April 15, 2024, 10:13:17 PM I'm trying to change shift points in Fxx Superb 2.0TDI 170HP, is this correct way to make it? Names/id's in mappack may be mixed up, I was guessing correct map by RPM's. Which way is ok? V1 or V2? Does anything of my work makes any sense?
Here is dump (ori/mod/kp) Title: Re: DQ250 F40s shiftpoints Post by: prj on April 15, 2024, 10:32:34 PM There are some maps by RPM for D and S blended depending on driver profile (0 to 100%), and then for amax mode and efficiency mode there are separate maps.
Nothing difficult. Title: Re: DQ250 F40s shiftpoints Post by: razor1199 on April 15, 2024, 11:12:33 PM There are some maps by RPM for D and S blended depending on driver profile (0 to 100%), and then for amax mode and efficiency mode there are separate maps. Nothing difficult. Yeah, I've done it in 0D9 mqb dsg, it was %pedal x TQ axises, but in this F40s it is done by RPM as you said, and also by vehicle speed (z axis), 1->2, 2->1 (y axis), %pedal x axis. I wonder which way should I use, the same like in MQB 0D9 using RPM? Title: Re: DQ250 F40s shiftpoints Post by: EanDem on April 16, 2024, 02:01:42 AM I'm trying to change shift points in Fxx Superb 2.0TDI 170HP, is this correct way to make it? Names/id's in mappack may be mixed up, I was guessing correct map by RPM's. Which way is ok? V1 or V2? Does anything of my work makes any sense? Here is dump (ori/mod/kp) What exactly you need is here: |