|
Title: 2004 Audi S4 can't for the life of me pull the eeprom, someone help please Post by: bmwlad2 on April 16, 2024, 10:48:04 AM Hello, long story short I bought this 04 Audi S4. The person I bought it off of lost the key and got a new one from the Dealer and I am not sure what went wrong as the key didn't work in any of the doors or ignition since an owner before him had all the ignition and lock cylinders replaced. I got it with that key, had a lock smith cut it to work in everything but he couldn't get the key to program. I have pull everything I can for eeprom and can't get the SKC. I tried using the me7 in the cmd to see if that would work and this is what I get:
C:\Users\user\OneDrive\Desktop\me7_95040_v1.31>me7_95040.exe -p3 --OBD -r s4-95040.bin Ver: 1.31 Com Port: 3 Baud Rate: 10400 Opening COM3 ... OK Initiating communication ... FAIL. (error=0x01) Closing COM3 Any insight on why it would fail would be great! Title: Re: 2004 Audi S4 can't for the life of me pull the eeprom, someone help please Post by: ecuprog7 on April 17, 2024, 12:15:44 AM Hi, try bootmode instead of obd, needs grounding bootpin on power up.
Title: Re: 2004 Audi S4 can't for the life of me pull the eeprom, someone help please Post by: _nameless on April 17, 2024, 08:52:20 AM Hello, long story short I bought this 04 Audi S4. The person I bought it off of lost the key and got a new one from the Dealer and I am not sure what went wrong as the key didn't work in any of the doors or ignition since an owner before him had all the ignition and lock cylinders replaced. I got it with that key, had a lock smith cut it to work in everything but he couldn't get the key to program. I have pull everything I can for eeprom and can't get the SKC. I tried using the me7 in the cmd to see if that would work and this is what I get: Also it's not a 95040 chip...C:\Users\user\OneDrive\Desktop\me7_95040_v1.31>me7_95040.exe -p3 --OBD -r s4-95040.bin Ver: 1.31 Com Port: 3 Baud Rate: 10400 Opening COM3 ... OK Initiating communication ... FAIL. (error=0x01) Closing COM3 Any insight on why it would fail would be great! Title: Re: 2004 Audi S4 can't for the life of me pull the eeprom, someone help please Post by: Matthewest91 on July 27, 2024, 01:14:46 PM Hello, long story short I bought this 04 Audi S4. The person I bought it off of lost the key and got a new one from the Dealer and I am not sure what went wrong as the key didn't work in any of the doors or ignition since an owner before him had all the ignition and lock cylinders replaced. I got it with that key, had a lock smith cut it to work in everything but he couldn't get the key to program. I have pull everything I can for eeprom and can't get the SKC. I tried using the me7 in the cmd to see if that would work and this is what I get: C:\Users\user\OneDrive\Desktop\me7_95040_v1.31>me7_95040.exe -p3 --OBD -r s4-95040.bin Ver: 1.31 Com Port: 3 Baud Rate: 10400 Opening COM3 ... OK Initiating communication ... FAIL. (error=0x01) Closing COM3 Any insight on why it would fail would be great! Hey brother, were you able to figure this out? |