|
Title: hi all. new and need help me7 3.8 v6 24v Post by: rossnsarah on April 20, 2024, 10:01:14 AM hey all
new here and in need of some help iv got a ford galaxy thats pritty much vag under the shell its running a 2.8 v5 24v. i believe there similer if not the same as rhe r32s im trying to get a read of my ecu without any luck iv tryed kess and mpps and managed to i'd my ecu at least h/w 0261206819 s/w 1037360634 vw s/w 022906032q 0011 iv got a kkl cable witch i believe is the ftdi chipset iv heard a few horror stories about how easy these can brick so im in real need of a stock file just in case is it right that the only way to get a read is by opening the ecu for the boot pin i heard that once its been mapped it should be ok to then read via odb again this is info iv been told and rad so i dont know myself for certen and hessitent to proceed please can anyone help point me in the right direction and possibly a stock file to recover from thanks much appreciated Title: Re: hi all. new and need help me7 3.8 v6 24v Post by: _nameless on April 20, 2024, 12:01:29 PM Pull it out and read it on the bench.
|