|
Title: Adapt software for changed crankshaft sensor location Post by: BlackT on April 22, 2024, 10:31:28 AM Short long story, I have 6HP on M7.1
Now I want to change gearbox, but I don't want to relocate sensor (6HP have sensor location like manual gearbox) and on my curent gearbox I need to relocate sensor to be in same position like on 5HP Is it posible to change that in software? To tell ECU that sensor is on different angle? Title: Re: Adapt software for changed crankshaft sensor location Post by: dus on April 23, 2024, 12:49:54 AM one mechanic I know who assembled such cars said that yes, it is possible. as well as PWM control of the fan block. he didn't change anything, just connected the wiring and everything worked. the flywheel remained original from 2.7
Title: Re: Adapt software for changed crankshaft sensor location Post by: BlackT on April 24, 2024, 02:35:29 AM What you mean by he didn't change anything?
Title: Re: Adapt software for changed crankshaft sensor location Post by: dus on April 25, 2024, 11:46:25 PM without modification of the flywheel or gearbox housing. without replacing the fan control unit
Title: Re: Adapt software for changed crankshaft sensor location Post by: BlackT on April 26, 2024, 10:53:28 AM What fan control unit have with this?
You say he only put 6HP gearbox and car is starting driving? Title: Re: Adapt software for changed crankshaft sensor location Post by: dus on April 27, 2024, 12:42:27 AM he talked about a4 8ะต
yes Title: Re: Adapt software for changed crankshaft sensor location Post by: kacperoooni on May 08, 2024, 03:36:10 AM one mechanic I know who assembled such cars said that yes, it is possible. as well as PWM control of the fan block. he didn't change anything, just connected the wiring and everything worked. the flywheel remained original from 2.7 Liar. Title: Re: Adapt software for changed crankshaft sensor location Post by: kacperoooni on May 08, 2024, 03:40:14 AM Short long story, I have 6HP on M7.1 Now I want to change gearbox, but I don't want to relocate sensor (6HP have sensor location like manual gearbox) and on my curent gearbox I need to relocate sensor to be in same position like on 5HP Is it posible to change that in software? To tell ECU that sensor is on different angle? You need to find in IDA constant GDWRT Title: Re: Adapt software for changed crankshaft sensor location Post by: _nameless on May 09, 2024, 09:46:55 AM Easiest solution would be to redrill the flex plate for the correct offset
Title: Re: Adapt software for changed crankshaft sensor location Post by: dus on May 10, 2024, 12:04:29 AM 078105323Q as well
Title: Re: Adapt software for changed crankshaft sensor location Post by: BlackT on May 10, 2024, 10:48:26 AM Easiest solution would be to redrill the flex plate for the correct offset That is how is now made on car. But it is really on strange place, aluminum there is too thinI need to weld also not only drill hole You need to find in IDA constant GDWRT thank you, I will try to find it |