|
Title: Sniffing between OBD and Diag Tester Post by: mmb1000 on April 22, 2024, 03:39:08 PM Hallo i tryed all to find out how to sniff the traffic between the OBD and the Diag Tester. Y - Cable i allready have.
I tryed ELM327 Terminal... AT Z, AT SP 4, AT HC1, AT MA - dont work. AT MA dont show me anything. I Use a ELM327 clone. Maybe that is the Problem ? Wireshark + ESP32 i dont get to work. https://github.com/aster94/Keyword-Protocol-2000?tab=readme-ov-file Every help will be estimated. Thank you. Title: Re: Sniffing between OBD and Diag Tester Post by: gt-innovation on April 23, 2024, 03:51:49 AM Look at Savvy Can. They even provide an esp32 firmware. Use an A0 or an A0 clone esp32 to flash it and log with savvy.
Title: Re: Sniffing between OBD and Diag Tester Post by: mmb1000 on April 23, 2024, 04:10:31 PM i need to sniff ISO14230/ KWP2000... Savvycan is only for Can - yeah ?
|