Title: M5.9.2 immo off 06A906018AD not working Post by: moffa13 on April 24, 2024, 11:04:03 AM Hello, My friend asked me to immo off but I could see that the eeprom was already desoldered once and it seems that it's already immo off (values set to 0x50) ? However car starts and stalls directly this is the link https://mega.nz/file/dAJ2lQRQ#pRR27s3VWjDqGxDlLHMM80OXhM70DSh0r0QUkalVhj4 (https://mega.nz/file/dAJ2lQRQ#pRR27s3VWjDqGxDlLHMM80OXhM70DSh0r0QUkalVhj4) Many thanks Title: Re: M5.9.2 immo off 06A906018AD not working Post by: stuydub on April 24, 2024, 11:28:41 AM its deffo off
Title: Re: M5.9.2 immo off 06A906018AD not working Post by: moffa13 on April 24, 2024, 11:33:20 AM What could cause the stall after 2 seconds ?
DTC 01128, 01176 Title: Re: M5.9.2 immo off 06A906018AD not working Post by: moffa13 on April 27, 2024, 11:53:09 AM Found the issue, these ecus contain 2 24c02 with same immo data structure.
One of them still had immo activated |