|
Title: DELETE Post by: Razorte on April 27, 2024, 02:09:18 PM DELETE
Title: Re: Injectors for 300HP e85 Post by: _nameless on April 27, 2024, 04:45:54 PM Hello, Anything that Ive seen from Bartek is china crap. Real Dekas should be easy to dial in. I've used decaps all the time without any issue, so you may have a hardware or calibration problem What injector reference do you recommend for 300hp on E85? Golf 4 GTI 1.8t 20V AUM I've already tried the Bosch 630cc 0 280 158 123 purchased from Bartek but they're impossible to tune. A friend tried the Siemens 630cc Deka injectors but experienced unstable idle and starting. So, I'm wondering which reference is really good for 630cc. Title: Re: Injectors for 300HP e85 Post by: EanDem on April 27, 2024, 11:23:24 PM Hello, What injector reference do you recommend for 300hp on E85? Golf 4 GTI 1.8t 20V AUM I've already tried the Bosch 630cc 0 280 158 123 purchased from Bartek but they're impossible to tune. A friend tried the Siemens 630cc Deka injectors but experienced unstable idle and starting. So, I'm wondering which reference is really good for 630cc. Mentioned injectors has up to 3% flow difference and it has delay to take in to account. Plus bit rodeo arround fuel density and temperature where you getting unstable run. I dropped fuel pressure for idle with wider SOI-EOI where flow difference not bite so hard. Yes issue remains - but less anoying. For check i installed Injector Dynamics ones - it has less issues with flow - but it is expensive compare to shady "Bosch" polish guy sels in company already mentioned. Another idea - run injectors flow test to get more accurate data on flow difference and deadtime - ajust CAL. I am not in detailed knowledge for MK4 CAL - so just shooting idea to sky here. Title: Re: Injectors for 300HP e85 Post by: prj on April 28, 2024, 02:04:17 AM I recommend some Bosch EV14 from www.finjector.com
They sell flow matched genuine injectors. Title: Re: Injectors for 300HP e85 Post by: Blazius on April 28, 2024, 07:32:31 AM Same as above. I got injectors from them and im very satisfied. They even sent me some chocolate in the package as a gift :)
Title: Re: Injectors for 300HP e85 Post by: aef on April 28, 2024, 10:59:40 PM I've already tried the Bosch 630cc 0 280 158 123 purchased from Bartek but they're impossible to tune. you could have just bought them elsewhere for a standard aftermarket price. bar-tek is always expensive because of "tuning". you most likely did something wrong within your file. 0280158298 are nicer and newer than the 0280158123. |