|
Title: MED9.1 P0601 help Post by: eliotroyano on May 12, 2024, 06:28:02 PM Anyone can guide how to solve a P0601 issue? ECU SW is 1P0907115H 0010. I was looking for a SGO without any luck. Attached is the eeprom with the P0601 error.
I appreciate your comments. Thanks, Title: Re: MED9.1 P0601 help Post by: Dande on May 13, 2024, 12:34:36 AM The problem will be in the flash. Have you tried fixing the checksums? Post a flash.
Title: Re: MED9.1 P0601 help Post by: eliotroyano on May 13, 2024, 05:30:23 AM The problem will be in the flash. Have you tried fixing the checksums? Post a flash. I come back to OEM flash (checksum revised too) and P0601 DTC persists. Also check checksum of previous attached eeprom, was ok too. Car has a really weird condition, intermittent misfires, very rough idle, hesitation under acceleration and does not pass 2000rpms. Title: Re: MED9.1 P0601 help Post by: _nameless on May 13, 2024, 05:37:24 AM Did you cross flash it on the bench? If so that's your issue.
Title: Re: MED9.1 P0601 help Post by: eliotroyano on May 13, 2024, 05:41:36 AM Did you cross flash it on the bench? If so that's your issue. No. It is the OEM SW version. A tune was charged. Car was working really nice by 2weeks. After 2h in a trip, car starts to produce the mentioned behaviour and commented DTC appears.Title: Re: MED9.1 P0601 help Post by: Dande on May 13, 2024, 06:09:53 AM Is your engine BWA? File you post isnt ori. Its already tuned. I thing i can help. Whats your hw mods? That tune has hw changes.
Title: Re: MED9.1 P0601 help Post by: eliotroyano on May 13, 2024, 06:57:24 AM Is your engine BWA? File you post isnt ori. Its already tuned. I thing i can help. Whats your hw mods? That tune has hw changes. Sorry friend I confuse a previous version of the tune. Ok anyway attached is original file from car. BWA is the engine. Car is almost original. Only mods are a catless downpipe and high flow air filter. Right now car is back using it original file, but the P0601 DTC remains there. Title: Re: MED9.1 P0601 help Post by: Dande on May 13, 2024, 09:08:11 AM Flash is fine. Try this eeprom. If the problem persists. Reflash Ecu with 1Z0907115D. Then compare the flash and change maps from the ori file. Its same damos version and engine.
Title: Re: MED9.1 P0601 help Post by: eliotroyano on May 13, 2024, 01:45:55 PM Flash is fine. Try this eeprom. If the problem persists. Reflash Ecu with 1Z0907115D. Then compare the flash and change maps from the ori file. Its same damos version and engine. Thanks a lot let me try and comment you. Title: Re: MED9.1 P0601 help Post by: eliotroyano on May 13, 2024, 05:18:02 PM Flash is fine. Try this eeprom. If the problem persists. Reflash Ecu with 1Z0907115D. Then compare the flash and change maps from the ori file. Its same damos version and engine. Hi friend. I let you know that the eeprom you sent me does not work. Title: Re: MED9.1 P0601 help Post by: aef on May 13, 2024, 11:39:05 PM I am not that familiar with fixing an med9 eeprom.
maybe you can flash 1P0907115_0040.sgo and eprom will fix on its own? gremlin and basano should be med9 specialists in here Title: Re: MED9.1 P0601 help Post by: eliotroyano on May 14, 2024, 10:14:34 AM I am not that familiar with fixing an med9 eeprom. maybe you can flash 1P0907115_0040.sgo and eprom will fix on its own? gremlin and basano should be med9 specialists in here Thanks for the advice. I will try it. |