NefMoto

Technical => Flashing and Chipping => Topic started by: C5AudiGirl on May 28, 2024, 10:24:15 AM



Title: Galletto 1260 Help
Post by: C5AudiGirl on May 28, 2024, 10:24:15 AM
I am trying to fix my 06 audi a6 4.2 ecu 4F0910560. I am trying to flash it and now it does not have a HW version. Any help?


Title: Re: Galletto 1260 Help
Post by: _nameless on May 29, 2024, 06:31:44 AM
I am trying to fix my 06 audi a6 4.2 ecu 4F0910560. I am trying to flash it and now it does not have a HW version. Any help?
I guess Ill bite. You are not providing enough info for anyone to help you. Also, what you wrote does not make any sense.


Title: Re: Galletto 1260 Help
Post by: C5AudiGirl on May 29, 2024, 02:15:38 PM
I guess Ill bite. You are not providing enough info for anyone to help you. Also, what you wrote does not make any sense.

Sorry, looking back on what I said does not make sense and I did not provide any real context. Let me try to make more sense.

I have an ME7.1.1 ecu and I was trying to flash a S4 firmware to it and I went into vagcom it no longer had a HW number, no dtc's at all. I flashed it back to the A6 bin i backed up and still the same issue. I assume you can not just flash firmwares like that they probally have to match the hardware inside the ecu. I am just trying to get it back to a working state as the way it came. If any more info is needed please let me know and I will provide.


Title: Re: Galletto 1260 Help
Post by: _nameless on May 29, 2024, 05:56:37 PM
Sorry, looking back on what I said does not make sense and I did not provide any real context. Let me try to make more sense.

I have an ME7.1.1 ecu and I was trying to flash a S4 firmware to it and I went into vagcom it no longer had a HW number, no dtc's at all. I flashed it back to the A6 bin i backed up and still the same issue. I assume you can not just flash firmwares like that they probally have to match the hardware inside the ecu. I am just trying to get it back to a working state as the way it came. If any more info is needed please let me know and I will provide.
It sounds like you are stuck in programming mode, or does vcds not connect to the ecu at all? What was the number on the ecu case and what software version did you write to it?