|
Title: me7.5 Readiness status Post by: merlinneo on June 02, 2024, 11:57:45 AM Hi
Ive seen a lot of post regarding readiness and in the process in sorting the map on my 1.8t converted Corrado. Obviously I have a lot of deletes on there and currently struggling with readiness. oxygen sensor heating (no rear 02 installed) removed from ESKONF oxygen sensor ( no rear 02 installed) removed from ESKONF evap emissions (no evap anything) removed from ESKONF What are the implications of leaving these be? i only have error codes for ABS AIRBAG and CLUSTER as these are missing and from my understanding should cause no issues with the driving of the car. Any input would be great, I haven't uploaded my .bin at this time as i would like to figure this all out myself. Thanks Title: Re: me7.5 Readiness status Post by: _nameless on June 02, 2024, 07:54:06 PM Eskonf (end staging) is just the i/o's if you do not configure the code words to disable the functions it will still throw codes for it. You can also disable the abs and cluster related issues by setting CW_CAN_R and CWCS or you can do it the uncivilised way and just delete the error codes from it.
|