|
Title: ME17 Boost Control/Feed Forward - Wastegate Pressure table (10x10) Post by: mike_gt on June 05, 2024, 04:18:29 AM Hi everyone,
I was wondering if someone would be able to help me finish my tuning on ME17.8. I am using TD04 Hybrid Twin turbos and stock wastegates with maximum preload (11PSI) and Stock which is 6 PSI. I am struggling to make my actual boost follow my setpoint, its either overshooting (low rpm) or undershooting (high rpm). I have heard of a boost patch for this ecu but I am not sure if the PID still remains active afterwards? If so I would be interested in patching the ecu with the boost patch but from what I understand, if the wastegate pressure tables are not setup correctly for more preload, will that even work? Any advice appreciated.. Thanks! Title: Re: ME17 Boost Control/Feed Forward - Wastegate Pressure table (10x10) Post by: mike_gt on June 06, 2024, 12:25:54 AM no one?
Surely not, this ecu is 10 years old.... Title: Re: ME17 Boost Control/Feed Forward - Wastegate Pressure table (10x10) Post by: IamwhoIam on June 06, 2024, 01:02:57 AM what vehicle exactly is your ME17.8 installed in? I don't think I've ever heard about such a boost patch for this ECU specifically.
Title: Re: ME17 Boost Control/Feed Forward - Wastegate Pressure table (10x10) Post by: mike_gt on June 06, 2024, 11:04:32 PM Its a McLaren ECU, but its basically just an MED17 use by Audi, Merc..
The ecu can be patched with custom code. etc Title: Re: ME17 Boost Control/Feed Forward - Wastegate Pressure table (10x10) Post by: IamwhoIam on June 07, 2024, 04:07:58 AM Then I suggest you take this on with the higher authorities of ECU patching and get it figured out then. Preferably for free too, right? Considering it's such an old ECU.
Title: Re: ME17 Boost Control/Feed Forward - Wastegate Pressure table (10x10) Post by: mike_gt on June 07, 2024, 09:31:39 PM im willing to pay :)
Title: Re: ME17 Boost Control/Feed Forward - Wastegate Pressure table (10x10) Post by: fknbrkn on June 07, 2024, 11:00:54 PM Post the file
Title: Re: ME17 Boost Control/Feed Forward - Wastegate Pressure table (10x10) Post by: James1 on June 08, 2024, 02:35:46 AM where are you based?
Title: Re: ME17 Boost Control/Feed Forward - Wastegate Pressure table (10x10) Post by: mike_gt on June 09, 2024, 11:49:46 PM someone reached out now, but thanks
|