NefMoto

Technical => Tuning => Topic started by: okdimok on June 17, 2024, 09:47:27 AM



Title: 3.2vr6 2step&Antilag Auto Add Script question
Post by: okdimok on June 17, 2024, 09:47:27 AM
Hello to everyone!
I have correctly done with this 2step & Antilag Auto Add Script and script succsesfuly added to my flash.
I get working launch controll and working NLS, but whyle car hit launch RPM's it just rev in it without any pops or flames.
In flash i have allready tune with huge bangs on decceleration and its working well and shooting like something C4 blows up.
I tryed to set FTOMN to 00, 01, 02, 10, but no any pops on launch.
As i understand IgnCut dosn't work, i tryed many of launch.php versions, and with all of thems script added correct ly without any errors, and car working same with all of thems.
Also i cheked with VCDS all sensors, brake and clutch sensor are working fine and launch controll working only then i stay with 0km/h and with clutch pressed, without that launch dosnt work.
Maybee someone can help me with this problem.
ecu 022906032ET
Sorry if i write the same thing like many others ppl on this forume, but i checked all topic's with this script and dosnt find any solution with my problem.
And also i have readed this topic too https://nefariousmotorsports.com/forum/index.php?topic=12559.0title=
And sorry for my bad ENG.


Title: Re: 3.2vr6 2step&Antilag Auto Add Script question
Post by: vwmaniac on June 20, 2024, 07:32:18 AM
lower the ignition cut duration, that seems to work better for the vr6


Title: Re: 3.2vr6 2step&Antilag Auto Add Script question
Post by: okdimok on June 21, 2024, 09:55:50 AM
Tryed allready 5, 20, 30, 50, 100, 200, and same result, tryed put ign angle on the 4500rpm to -15, same result no any shoots on launch


Title: Re: 3.2vr6 2step&Antilag Auto Add Script question
Post by: gt-innovation on June 23, 2024, 03:22:21 AM
Tryed allready 5, 20, 30, 50, 100, 200, and same result, tryed put ign angle on the 4500rpm to -15, same result no any shoots on launch

You expect to have the required results with code patches that you don`t know how they work and you did not write yourself. There are many ways to do this and even ignition cut is not needed.I have posted some years ago something basic in the forum to get you started on understanding me7.1.1 .Use that as a base and once you figure things out the result will be like this https://www.youtube.com/watch?v=DUcXId0OJKo (https://www.youtube.com/watch?v=DUcXId0OJKo)