NefMoto

Noob Zone => Noob Questions => Topic started by: fknbrkn on June 18, 2024, 01:34:12 AM



Title: Question regarding rich BTS at TFSI ecus
Post by: fknbrkn on June 18, 2024, 01:34:12 AM
AFAIK enrichment has no noticeable impact to EGTs at TFSI engines so why the BOSCH makes 0.7 lambda in BTS then?


Title: Re: Question regarding rich BTS at TFSI ecus
Post by: prj on June 18, 2024, 07:46:02 AM
Of course it makes a noticeable impact.

It reduces knock sensitivity, and going away from lambda 1 in either direction always reduces egt.


Title: Re: Question regarding rich BTS at TFSI ecus
Post by: fknbrkn on June 18, 2024, 09:41:22 AM
Of course it makes a noticeable impact.

It reduces knock sensitivity, and going away from lambda 1 in either direction always reduces egt.

Im asking bc saw your post years ago, something like: lambda < 0.8 makes no sense at DI due to no vaporization effect
And this make sense
Also stock BTS with lambdasoll ~0.65 could be reason of misfires, its pretty clear with MPI setups, but didnt get the point at DI


Title: Re: Question regarding rich BTS at TFSI ecus
Post by: prj on June 18, 2024, 03:45:33 PM
EGT always goes lower with richer mixture.

Lambda <0.8 usually does not make much sense as a normal target, because you lose power compared to reducing boost...