NefMoto

Technical => Diagnostics => Topic started by: xXxCryxXx on September 08, 2024, 04:04:38 AM



Title: MED 9.1 OBD2 ECU Block
Post by: xXxCryxXx on September 08, 2024, 04:04:38 AM
Hello i have a question

I have a Car and someone tune it before... Now ECU Works but if i connect VehiCAL or VCDS or MMS and so on no of the Tool works on the ECU. Now i had a car from some years ago who also had a OBD2 Block

Where is this Located on the ED35 Data?

Can anyone give me a hint? I know its blocked becuse of all other ECU are responding if i asc for single Parameters. If i push on "Autodetect" the  Gateway is not responding :<.

Thanks @all answers


Title: Re: MED 9.1 OBD2 ECU Block
Post by: prj on September 08, 2024, 11:43:07 AM
VehiCAL in basic mode or VCDS should still work.
If they don't then there's some other problem, I don't think it's because it's tuned.