|
Title: Takeuchi TB260 dpfoff problem Post by: lihter on October 24, 2024, 11:34:01 PM Hello, I have a dpfoff problem on a Takeuchi TB260 excavator with Yanmar engine 4TNV86CT-PTB and Bosch edc17cv54 ecu. I did the dpf off but I have a problem with regeneration every aprox. 90 hours. The sensors are disconnected (2x temp, differential pressure), there are no faults except with the mentioned regeneration. I also have the Texa OHW diagnostics, I reset the dpf but it doesn't help. I'm looking for someone who can help.
Title: Re: Takeuchi TB260 dpfoff problem Post by: _nameless on October 29, 2024, 02:57:56 PM Just an FYI this site is not for farm or construction equipment. Also about .1% of this forum is diesel. Lastly, pay someone for quality work, pushing "off" a button on some auto delete software gets you what you have currently ;)
Title: Re: Takeuchi TB260 dpfoff problem Post by: mdpower on November 20, 2024, 10:06:35 AM Hello, I have a dpfoff problem on a Takeuchi TB260 excavator with Yanmar engine 4TNV86CT-PTB and Bosch edc17cv54 ecu. I did the dpf off but I have a problem with regeneration every aprox. 90 hours. The sensors are disconnected (2x temp, differential pressure), there are no faults except with the mentioned regeneration. I also have the Texa OHW diagnostics, I reset the dpf but it doesn't help. I'm looking for someone who can help. So the calculated soot content still increase. Please post the original, I can take a look if it similar I have done before. |