NefMoto

Technical => Tuning => Topic started by: golf110 on November 11, 2024, 10:20:55 AM



Title: Audi a3 r32 me7.1.1 VVT adjust
Post by: golf110 on November 11, 2024, 10:20:55 AM
Hello, can someone help with setting the VVT on P32 me7.1.1 audi a3. I set up these maps but to no avail. I want to tune an intake camshaft.
KFNWWUE, DWNWABGE, KFDWNWSUE, KFNWKHE, KFNWKHKE, KFNWKHLLE, KFNWKHLLKE, KFNWKRE, KFNWLLE,
KFNWSE, KFNWWLE, KFNWWLLE, WNWSMXE, WNWSTE, WNWSWOFE and WNWREO.


Title: Re: Audi a3 r32 me7.1.1 VVT adjust
Post by: _nameless on November 12, 2024, 01:35:06 AM
Do you have a dyno?


Title: Re: Audi a3 r32 me7.1.1 VVT adjust
Post by: golf110 on November 12, 2024, 03:29:30 AM
Yes, I have a dyno, but camshaft actual position is not  like in map in software.


Title: Re: Audi a3 r32 me7.1.1 VVT adjust
Post by: prj on November 12, 2024, 10:06:35 AM
3 Options:

a) Use a proper logger instead of VCDS and you will see everything like it is in the software.
b) Create own measuring blocks for VCDS.
c) Dig into the FR and figure out how to back calculate what you need.

Each one of them will solve the issue.