|
Title: CH box software versions Post by: belligerent_b5 on July 29, 2012, 04:40:03 PM I'm building an .xdf for the CH box using a map pack created by Rob.mwpropane for the CH box with s/w ver 360854, while my ECU is ver 360101. Are the different versions enough to keep the address from the maps from lining up correctly? Or am I just doing it wrong?
Also, could I just flash the 360854 .bin to my ECU and save myself the headache of manually finding all the addresses of the maps? Title: Re: CH box software versions Post by: rob.mwpropane on July 29, 2012, 09:48:08 PM Are the different versions enough to keep the address from the maps from lining up correctly? Or am I just doing it wrong? Also, could I just flash the 360854 .bin to my ECU and save myself the headache of manually finding all the addresses of the maps? The maps won't line up correctly between those two, but the x and y axis do. If you give me until tomorrow evening, I have a kp.file (definition file for winols) that I've been meaning to post for a while for the 360101. Or you can flash to the other revision no problem. I know someone (nyet?) on here has been working on a kp to xdf converter, but I'm unsure if it workstations on the winols version I use (1.7). Either way, I have an updated version of both revisions with more stuff defined, mostly all that's been discussed over the last few months. Fwiw, easiest way to find maps is with winols, even the demo. Compare in 2d mode. Cheers. Title: Re: CH box software versions Post by: rob.mwpropane on July 30, 2012, 03:09:17 AM Posted in my ori thread in Ecu def files.
Title: Re: CH box software versions Post by: belligerent_b5 on July 30, 2012, 09:56:12 AM Thanks rob
Title: Re: CH box software versions Post by: rob.mwpropane on July 30, 2012, 03:25:52 PM Thanks rob Sure, it should be pretty obvious that anything at the top is still a work in progress, anything in folders is legit (should be anyway;). Cheers. Title: Re: CH box software versions Post by: dirtygerman on August 07, 2012, 09:30:39 PM hate to ask but have you created or know of a XDF file for the CH box?
Title: Re: CH box software versions Post by: amd is the best on November 06, 2012, 03:58:15 PM And succes in creating the CH xdf?
Title: Re: CH box software versions Post by: k0mpresd on November 06, 2012, 04:04:34 PM 4b0906018ch?
Title: Re: CH box software versions Post by: rob.mwpropane on November 06, 2012, 04:37:12 PM No, I have not personally done an xdf for the 4b0906018Ch, I have had some people say they were going to convert to xdf, but I haven't heard anything yet.
|