|
Title: ME7.5 - reading and editing with WinOLS Post by: rickysoulz on February 04, 2025, 02:31:32 PM Hey guys,
My friend has a Audi A4 B5 1.8T with the ME7.5 ECU. I recently saw a adapter and software called MPPS. I ordered the adapter and got myself the software needed to read the ecu. I also found some videos on how to do certain things like, NLS, LC, Pops and Bangs using WinOLS. My question is: Does anybody have expierence using MPPS to read the ME7.5 and if so, can i use the output file and import it into WinOLS? I never used WinOLS, do i need ECU Definitions? And if so where do i find these for the ME7.5 Thanks in advance. Title: Re: ME7.5 - reading and editing with WinOLS Post by: davidklmn on February 05, 2025, 09:35:01 AM First of all,
welcome to the Forum! The MPPS is a pretty good all-rounder, it can read a lot of ECUs. To answer your questions, although I have no experience in using a MPPS-Cable to read the ECU of a ME7.5. It's pretty obvious that you can use the output file and import it into WinOLS. You need ECU Definitions for all ECUs in WinOLS. You can find some Mappacks on here. A good advice from me is that you read a lot through this forum and start with something simple like Pops and Bangs, or just increasing your Speed Limiter or RPM Limiter. You won't find a lot of people who are willing to tell you instantly what you have to do without giving back to the community first. I hope i was able to help you along. Have fun :) |