|
Title: Fans running after Wideband conversion from APP to BAM Post by: RavenT on February 24, 2025, 03:58:17 PM Hey guys,
I have a Problem with a TT MK1 APP after converting it to wideband ECU (i did a Lot of wideband Swaps so far). The Fans are running on second Stage as soon as i Turn ignition on and keep running also when the Engine is running. I Had this issue once 5 years ago but i can't get the solution Back in my mind... If i Plug Back the APP narrowband Ecu No issues with the Fans so there must be anything with the Wideband Ecu / Signal Output to cause the Fans running... I Hope someone Here had this issue also and can Help my mind to recognize what the Problem was... Title: Re: Fans running after Wideband conversion from APP to BAM Post by: dal on February 24, 2025, 05:58:07 PM As I can remember, its the pin 61.
Title: Re: Fans running after Wideband conversion from APP to BAM Post by: RavenT on February 24, 2025, 06:38:00 PM You know what is the Problem with Pin 61? I am looking at the wire diagrams of both Cars and can't figure it out...
Title: Re: Fans running after Wideband conversion from APP to BAM Post by: aef on February 24, 2025, 11:38:11 PM Remove the cable/pin in Pin61 and move it to the side.
Title: Re: Fans running after Wideband conversion from APP to BAM Post by: RavenT on February 25, 2025, 03:18:57 PM Thank you this was the Problem.
|