|
Title: After SWAP VR6 3.2 DTC deactivation Post by: ibanezgomez on March 06, 2025, 01:21:16 PM Hi, some months ago I started this thread: http://nefariousmotorsports.com/forum/index.php?topic=23410
Where I asked if someone could share a definition of my ECU file and could help me a bit to disable some DTCs after install a 3.2 from a Audi TT 8N in my Golf IV 2.8. As I have not had much success... I am asking directly if someone can please make those modifications to my ECU. The aim is to disable the DTCs (17978 IMMO is not needed, than was a momentary failure) in the picture in the attached ECU file 022906032FA. Thank you very much, Samuel Title: Re: After SWAP VR6 3.2 DTC deactivation Post by: _nameless on March 07, 2025, 03:15:26 AM I got you, check your pm eskonf and prokon bits set to disable the nonsense
|