|
Title: M5.9.2 - 06A 906 018 GM - Second Lambda Deactivation Post by: 00gtw00 on August 03, 2012, 07:51:00 AM I'm looking for damos or help with second lambda deactivation in M5.9.2 06A906018GM - VW Golf 2.0 AQY 115HP.
I can't find CWKONLS. Title: Re: M5.9.2 - 06A 906 018 GM - Second Lambda Deactivation Post by: matchew on August 03, 2012, 10:39:03 AM ;D
Title: Re: M5.9.2 - 06A 906 018 GM - Second Lambda Deactivation Post by: 00gtw00 on August 04, 2012, 07:12:26 AM In attachment org bin for 06A 906 018 GM - 0 261 206 921
Title: Re: M5.9.2 - 06A 906 018 GM - Second Lambda Deactivation Post by: pvl on August 05, 2012, 05:05:28 AM Hi,
I wonder if you will find CWKONLS in a M5.9.2 file... Me thinks that's ME7-territory. Cheers, PvL Title: Re: M5.9.2 - 06A 906 018 GM - Second Lambda Deactivation Post by: 00gtw00 on August 05, 2012, 08:13:08 AM Right. Any one can give me a tip :) ?
Title: Re: M5.9.2 - 06A 906 018 GM - Second Lambda Deactivation Post by: 240sxpooter on August 06, 2012, 07:14:22 AM I'm looking for damos or help with second lambda deactivation in M5.9.2 06A906018GM - VW Golf 2.0 AQY 115HP. I can't find CWKONLS. I think you will be looking for these to deactivate the rear O2 CDLSH -Codewort Sondendiagnose hinter Kat im OBDII-Mode (invers: Europa-Mode) = Maybe @ 6F9B Currently 1, to deactivate change to 0 CDHSV - Codewort Heizerdiagnose vor Kat im (CDHSV = 0 => keine Diagnose) = Maybe @ 655B Currently 0 CDHSH - Codewort Heizerdiagnose hinter Kat (CDHSH = 0 => keine Diagnose)= maybe @665C Currently 0 I am by no means 100% on the location of these bits but the CDLSH closely matched a file i had so test these with caution. Title: Re: M5.9.2 - 06A 906 018 GM - Second Lambda Deactivation Post by: pvl on August 06, 2012, 07:15:58 PM Hi 240sxpooter,
I saw you had some interesting information. You where referring to "a file you had". Would you be so kind to post that one ? It's had to get hold of these important files... And if possible, also the file which has the 3 stated o2 switches. You may also P.M. me about it. Thanks, PvL Title: Re: M5.9.2 - 06A 906 018 GM - Second Lambda Deactivation Post by: xxx8indxxx on August 07, 2012, 01:31:10 AM (http://sphotos-a.xx.fbcdn.net/hphotos-ash4/402160_4433336392386_231851521_n.jpg) this should be 02 heating address
Title: Re: M5.9.2 - 06A 906 018 GM - Second Lambda Deactivation Post by: 240sxpooter on August 07, 2012, 05:53:30 AM Also in your ORI file I have scene a tune with the area between 7469-77c7 Zero'ed to remove all DTC's.
Title: Re: M5.9.2 - 06A 906 018 GM - Second Lambda Deactivation Post by: xxx8indxxx on August 07, 2012, 08:05:09 AM I might have to try that out
Title: Re: M5.9.2 - 06A 906 018 GM - Second Lambda Deactivation Post by: k0mpresd on November 18, 2012, 05:08:38 PM (http://sphotos-a.xx.fbcdn.net/hphotos-ash4/402160_4433336392386_231851521_n.jpg) this should be 02 heating address i found this set of data in a file as well but readiness still shows as failed after flashing and checking on the bench. does the ecu need to be in the car (engine running)? or are there still pieces to the puzzle missing? i 00'd the data, is that correct? |