|
Title: Med9.1 big injector relative pressure and wot enrichment Post by: grainqey on March 24, 2025, 09:28:20 AM Hello,
So basically I'm big turbo and I fitted really large (+41%) injectors, I've changed the value in timin, rail pressures at idle for the idle afr, fkkvs to sort normal driving out but I'm struggling with the wot fuelling. There's a ti relative to pressure map, is that the correct one that's a 2d map? From reading I need to change this but I can't remember what it's called. I also didn't know if it was increasing the axis or lowering the values so I didn't do anything with it. I found kfbade for acceleration enrichment factor, should I change this at all or is it always left? Thanks Title: Re: Med9.1 big injector relative pressure and wot enrichment Post by: chacarita on March 24, 2025, 01:09:13 PM KRKATE
Title: Re: Med9.1 big injector relative pressure and wot enrichment Post by: grainqey on March 25, 2025, 02:41:48 AM Thanks for that, I thought people had been on about KLHDEV or something else rather than KRKATE
|