|
Title: Need .xdf File 1.8t ARY 8N0906018AQ 0001 Post by: TT0201 on May 18, 2025, 02:16:06 PM Hi,
i found some other .xdf for my ECU but there are no units and parameters to the maps. so i dont, so I don't really have a clear view because it is simply not well managed. I tried to make my own .xdf with some dudes Hex adresses but id only managed to get like 6 Maps after 8 hours. If someone had a proper .xdf for me that would realy help alot. (if you have an .bin for my ECU for 210Hp that would be awsome) Ps. I am Only like 2-3 day in ecu Programming, so pls dont hat for my stupidity. Title: Re: Need .xdf File 1.8t ARY 8N0906018AQ 0001 Post by: gremlin on May 19, 2025, 04:40:54 AM There is many XDFs that are 100% full compatible to your 8N0906018AQ 0001.
You can find on this forum and use 06A906032HN_0001 06A906032HP_0001 06A906032HJ_0002 06A906032HK_0002 06A906032HF_0004 and 0005 06A906032HS_0006/0007/0008 06A906032HR_0001 06A906032HS_0008 8N0906018AM_0001 PS: 210PS is impossible only by ECU firmware. You must make engine hardware mods. Original bin file in attachment. Title: Re: Need .xdf File 1.8t ARY 8N0906018AQ 0001 Post by: TT0201 on May 22, 2025, 01:32:52 PM Hi, Thank you so much, you're really helping me out. My colleague had the same TT as me, and it also had 210 hp, just via software, but only until he drove it into a tree. :-\ Otherwise I would have his .bin file.
But thanks again for the help. Title: Re: Need .xdf File 1.8t ARY 8N0906018AQ 0001 Post by: TT0201 on May 23, 2025, 03:00:08 AM Hi again,
I've tried all of the .xdf files you mentioned, but none of them work properly and they really dont make that much sense. Almost every map has odd values. It would be really great if someone could help me, as I'm still a beginner. I've attached the original .bin files and a screenshot from TunerPro below. Thanks in advance. 8N0906018AQ 0001 Audi TT 8n Quattro ARY 180hp 2002 Title: Re: Need .xdf File 1.8t ARY 8N0906018AQ 0001 Post by: gremlin on May 23, 2025, 09:47:08 AM I've tried all of the .xdf files you mentioned, but none of them work properly and they really dont make that much sense. According your picture you try to use XDF 032HN_0002. This case is not suited to 032HN_0001 and your firmware. Title: Re: Need .xdf File 1.8t ARY 8N0906018AQ 0001 Post by: TT0201 on May 26, 2025, 12:13:22 PM What should i do now?
Title: Re: Need .xdf File 1.8t ARY 8N0906018AQ 0001 Post by: gremlin on May 26, 2025, 03:52:16 PM What should i do now? Use this 032HS xdf minipack. http://nefariousmotorsports.com/forum/index.php?topic=9242.0 Title: Re: Need .xdf File 1.8t ARY 8N0906018AQ 0001 Post by: TT0201 on June 01, 2025, 08:10:10 PM Thanks for the help, but the .xdf you send me is just like the first .xdf. The Units an values don't look right and they make no sense in my head so far. Just for example, the picture i attached down below shows the map for engine load disired, but i dont understand the values in list. for example: at 5000RPM with 99% signal from the gas peddal it gives out 181.410 of what?? boost? like 1.81 bars of absolute presure (0.8Bar of boost) ? or 181.410hp? i dont have any idea.
And there are several lists (German=Tabellen) twice like only with slighly other values. for example: KFZW and KFZW2. I would thank u alot if u can help me a little to understand this magic language. Thanks in advance. Title: Re: Need .xdf File 1.8t ARY 8N0906018AQ 0001 Post by: gremlin on June 02, 2025, 09:10:38 AM All calibration maps in this XDF file are defined correctly and the values are correctly converted to physical values.
But this will not give anything to someone who has no idea how ECU type me7.5 works. And the forum is not a place where detailed lectures on the subject are given. If you want to understand, study the FR (Funktionsrahmen) pdf documents that are on this forum. It will also be useful to read the pages on S4wiki. https://s4wiki.com/wiki/Tuning |