Title: MK60 ABS having issues with G201 sensor? Post by: Grapple6291 on June 08, 2025, 05:54:06 AM Hi,
As per title, I'm having trouble with my "new" ABS module. I did mk20 ABS/ESP (Audi TT 8n '99) -> mk60 ABS/ESP (Octavia 1 RS '03) retrofit (Wiring, plumbing etc..) and now I get G201 fault code. The specific fault code is: 01435 - Brake Pressure Sensor 1 (G201) 012 - Electrical Fault in Circuit Channel 005 is showing proper pressure, Channel 006 is unavailable. There were no issues/errors prior doing the retrofit. I do not have the G214 wired in. The only thing I changed was the ABS itself and did old t47 to new t47 connectors. I've checked the wiring of both the ABS and the G201 with multimeter and found no problems there... The only thing that is coming to my mind is to: Wire in the G214 Use the 1J0 907 597 A G201 sensors from Octavia 1 instead the "original" 1J0 907 597 B G201 sensors. Can anyone please point me in the right direction? Thanks! |