NefMoto

Technical => Tuning => Topic started by: BlackT on June 11, 2025, 03:58:13 AM



Title: Need some help to get more power out 1.8T high boost (3bar)
Post by: BlackT on June 11, 2025, 03:58:13 AM
As title say I am running high boost 1.8T, puslar GTX3584rs gen3  at E100, ADR cams. I don't have any clue where to set ignition, car is making same power(around 900 hp) at 2.6 and 3 bar boost, also iginition ends (8000 rpm)  at 24° or 27° there is no change in power

I don't want to dyno car, it is allready at maximum so dyno runs maybe will kill it, it is for drag racing.
Engine is running great, make great powerband but I want to discus is there any chance to make more power. Do I need to go on lower ingnition angle at that high boost levels?  


Title: Re: Need some help to get more power out 1.8T high boost (3bar)
Post by: BlackT on July 17, 2025, 05:05:31 AM
Anyone?


Title: Re: Need some help to get more power out 1.8T high boost (3bar)
Post by: aef on July 17, 2025, 06:06:51 AM
When i played with flexfuel sensor i learned that on E85 i can add 12 degree in comparison to aral102 petrol to see the same ignition retard.

Why not rely on Knocksensors?


Title: Re: Need some help to get more power out 1.8T high boost (3bar)
Post by: overspeed on July 17, 2025, 01:18:25 PM
As title say I am running high boost 1.8T, puslar GTX3584rs gen3  at E100, ADR cams. I don't have any clue where to set ignition, car is making same power(around 900 hp) at 2.6 and 3 bar boost, also iginition ends (8000 rpm)  at 24° or 27° there is no change in power

I don't want to dyno car, it is allready at maximum so dyno runs maybe will kill it, it is for drag racing.
Engine is running great, make great powerband but I want to discus is there any chance to make more power. Do I need to go on lower ingnition angle at that high boost levels?  

E100 ? Did you move to Brasil ?  Lol

Do E100 a everyday basis...  work mostly on daily cars... about only 500Whp on this plataform

What CR do you have ?


Title: Re: Need some help to get more power out 1.8T high boost (3bar)
Post by: BlackT on July 17, 2025, 02:57:29 PM
CR is 8:1

I don't have knock sensors, as I know on etanol engine can't knock

It is drag car, yes is running on E100, I didn't move to Brasil haha