|
Title: Communication Ross Tech cable, on device list but no connecting with ECU Post by: vpereira on July 05, 2025, 11:09:29 PM Good afternoon,
I have been trying to connect with my amarok 2013 2.0 btdi, after installing the drivers and setup as dumb mode in VCDS, my cable now shows up at the top device list in Nefmoto, but when I try to connect with the vehicle I doesn't make it. Got stuck now, tried different baud options, not sure if needs another configuration to work. Validated FTDI device is in dumb mode. Disconnected Connecting... Starting slow init connection. Connecting to address 0x01. Slow init failed. Disconnected Connecting... Starting slow init connection. Connecting to address 0x01. Slow init failed. Disconnected Appreciate any help, thank you!! Title: Re: Communication Ross Tech cable, on device list but no connecting with ECU Post by: _nameless on July 06, 2025, 01:43:14 AM Good afternoon, Nefmoto only works on me7 ecus nothing else you have a edc17 ecu so to be frank, not a chance in hell it will ever do anything with that ecu. Buy a clone version of pcm flash and a sm2 clone if you want to do that, you can find them on aliexpress for $60 bucks for the set normally.I have been trying to connect with my amarok 2013 2.0 btdi, after installing the drivers and setup as dumb mode in VCDS, my cable now shows up at the top device list in Nefmoto, but when I try to connect with the vehicle I doesn't make it. Got stuck now, tried different baud options, not sure if needs another configuration to work. Validated FTDI device is in dumb mode. Disconnected Connecting... Starting slow init connection. Connecting to address 0x01. Slow init failed. Disconnected Connecting... Starting slow init connection. Connecting to address 0x01. Slow init failed. Disconnected Appreciate any help, thank you!! Title: Re: Communication Ross Tech cable, on device list but no connecting with ECU Post by: vpereira on July 06, 2025, 10:40:47 PM Got it, well ok ill have a look on those soon.
Thank you ! |