|
Title: air conditioning / climatronic on canbus Post by: tao13 on July 11, 2025, 05:27:58 AM Hi.
Is there any chance I can replicate (without asm changes) the compressor control function as it is on the seat ibiza 1.8t 06A906032TL (which has a climatronic that sends messages on canbus and does not have a direct wire to the ecu) on a 1.8t ecu BAM 8N0906018H? I tried with the flag in the KOS 113.160 Klimakompressor - steuerung functions, but the compressor does not start when I turn on the air from the climatronic. Title: Re: air conditioning / climatronic on canbus Post by: gremlin on July 11, 2025, 03:48:41 PM CAN commands control depends on Climatronic firmware with PWM compressor type not from ECU firmware.
Title: Re: air conditioning / climatronic on canbus Post by: tao13 on July 12, 2025, 12:47:30 AM it is in ecu firmware. if i put the ecu file 032tl on 018h bam ecu , air and compressor work ok, with bam 018h file the compressor not work. It is something ion ecu file for sure
Title: Re: air conditioning / climatronic on canbus Post by: tao13 on July 22, 2025, 10:49:32 AM RESOLVED.
CW + KOS ! Title: Re: air conditioning / climatronic on canbus Post by: dal on July 23, 2025, 05:06:02 AM tao13, what was you were trying to archive? Control an PWM compressor in 8L car?
|